MMS round guide system
The round guide system from Kemmler+Riehle enables linear and rotary within the MMS modular system without leaving the MMS standard.
Two guide units, consisting of a bearing housing and a bush, together with an aluminium profile from the MMS44 series form the basis of every round guide system.
To complete the system, the basic assembly is guided on a steel shaft, which is fixed and fastened by means of two mounting units.
Round guide systems with a shaft diameter of Ø12 mm, Ø20 mm and Ø30 mm are available.
When using a shaft with a diameter of Ø12 mm or Ø20 mm, a square profile with a cross-section of 40x40 mm is required to connect the basic assembly used, whereas when using a shaft with Ø30 mm, a suqare profile with a cross-section of 60x60 mm is used.
In the case of linear guides, the shaft is made of the shaft steel Cf53Cr (hard chrome-plated), in the case of rotary guides from the stainlees steel V2A.
- Linear guide units
- Rotation guide units
- Axes
- Adjusting rings
- Stop washers
- Axle mount units
- Clamping rings
Linear guide unit Ø30
- profile MMS44 60x60 mm
- axis Ø30 mm
- bearing housing (aluminium) with ball bushing and cylinder head screw M6x40
Linear guide unit Ø20
- profile MMS44 40x40 mm
- axis Ø20 mm
- bearing housing (aluminium) with ball bushing, stop plates (steel) and cylinder head screw M6x65
Linear guide unit Ø12
- profile MMS44 40x40 mm
- axis Ø12 mm
- bearing housing (aluminium) with ball bushing, stop plate (steel) and cylinder head screw M6x35
Rotation guide unit Ø12
- profile MMS44 40x40 mm
- axis Ø12 mm
- bearing housing (aluminium) with sintered bronze collar bushing and cylinder head screws M6x40
Rotation guide unit Ø20
- profile MMS44 40x40 mm
- axis Ø20 mm
- bearing housing (aluminium) with sintered bronze collar bushing and cylinder head screws M6x40
Rotation guide unit Ø30
- profile MMS44 60x60 mm
- axis Ø30 mm
- bearing housing (aluminium) with sintered bronze collar bushing and cylinder head screws M6x40
Rotation guide unit Ø12 (radial)
- for axis Ø12 mm
- pipe clamp (aluminium) with intermediate flap (aluminium)
Rotation guide unit Ø20 (radial)
- for axis Ø20 mm
- pipe clamp (aluminium) with intermediate flap (aluminium)
Rotation guide unit Ø30 (radial)
- for axis Ø30 mm
- pipe clamp (aluminium) with intermediate flap (aluminium)
